CORDOVA RESEARCH – 1.4 X 2.4 INCH – 2000kv – 1/10 SCALE MOTOR

Description

CORDOVA RESEARCH – 1.4 X 2.4 INCH – 2000kv – 1/10 SCALE MOTOR

These motors are made for speed you will be amazed at the output. The Cordova Research Motors are hand build by the Cordova family here in the USA. One piece of advise don’t run these motors with out a load on them. If you do you could cause damage and it may not be covered under warranty.

Warranty
The warranty on the motors are as is without warranty. The reason it that too many people have abused the motors and expected to get them replaced for no cost. So if you have a motor that you believe has failed because of malfunctioning motor or manufacturing defect please contact the Cordova Research. They will evaluate your motor and work towards a fair resolution.

Here is the contact information for Cordova Research
Email: sales@cordovaresearch.com
Phone: (619) 730-4983

Please contact us if you have any questions about these motors or any products we sell.

Notes:
Motor are build with 3 wires to connect to the Electronic Speed Control. You should never cut the wires but you will need to add connectors. 4mm male and female connectors are a common method for wiring.

The motors do not come with a flat spot on the rotor shaft and it is recommended to use a file or Dremel tool to cut the flat spot exactly where you need it. Also the shafts are usually long and could need to be cut off to meet you needs. Lastly NEVER bench test these motors to free spin, the should alway have a load on the motor. High prolong free spinning could cause damage to the motor.

I hope you enjoy this motor and find speeds like never before like many before you.