CORDOVA RESEARCH – 1.4X3.6 INCH – 3000kv – 1/8 SCALE MOTOR

Description

CORDOVA RESEARCH – 1.4X3.6 INCH – 3000kv – 1/8 SCALE MOTOR

Cordova Story
Cordova Research is a family run business that was started by Jose Cordova. The motors are built in a garage in Souther California by Jose and his sons. They have been in business for 10 years and the top quality motors have been setting records of speed in all class of Remote Control products. Jose has been involved with NeuMotors and Castle Creations. Jose has been in the motor business for over 35 years.

 Specs:

Diameter: 1.450 in= 36.8 mm.

Length: 3.650 in= 92.7 mm

Shaft: 8mm only

Kv: 3000

Max Voltage:22.2 Volts

Max cells: 6s

Watts: 2.250

Max rpm: 60,000

Max current: 400 amps

Max temp 250 F.

Warranty
The warranty on the motors are as is without warranty. The reason it that too many people have abused the motors and expected to get them replaced for no cost. So if you have a motor that you believe has failed because of malfunctioning motor or manufacturing defect please contact the Cordova Research. They will evaluate your motor and work towards a fair resolution.

Here is the contact information for Cordova Research
Email: sales@cordovaresearch.com
Phone: (619) 730-4983 • (619) 840-4279

Please contact us if you have any questions about these motors or any products we sell.

Notes:
Motor are build with 3 wires to connect to the Electronic Speed Control. You should never cut the wires but you will need to add connectors. 4mm male and female connectors are a common method for wiring.

The motors do not come with a flat spot on the rotor shaft and it is recommended to use a file or Dremel tool to cut the flat spot exactly where you need it. Also the shafts are usually long and could need to be cut off to meet you needs. Lastly NEVER bench test these motors to free spin, the should alway have a load on the motor. High prolong free spinning could cause damage to the motor.

I hope you enjoy this motor and find speeds like never before like many before you.